Professional Firearm Repair, Customization & Custom Builds
Published pricing. No surprises. Cleaning to chamber work, optic cuts to full Cerakote, NFA transfers to AR/AK/HK parts kit assembly — done in-house at our Maitland, FL shop.
FFL Transfers, NFA & Suppressor Refurbishment
| Transfer | Price |
|---|---|
| Rifle, Pistol, Shotgun | $25.00 |
| NFA — Machine Gun / SBR / SBS | $150.00 |
| Suppressor | $85.00 |
| NFA Engraving | $75.00 |
| Suppressor Refurbishment | Price |
|---|---|
| Rimfire / Pistol | $200.00 |
| Rifle (starting at) | $500.00 |
Inspection, Boresight, Cleaning & Hourly Rates
| Service | Price |
|---|---|
| Inspect firearm and prepare written quote | $45.00 |
| Boresighting | $30.00 |
| Scope mounting and boresighting | $50.00 |
| Minimum shop charge | $30.00 |
| Labor Hour | $80.00 |
| Machine Hour | $100.00 |
| Welding Hour | $100.00 |
| Cleaning | $65.00 |
| Test Fire (customer-provided ammo) | $15.00 |
| Test Fire (shop-supplied ammo, 3 rounds only) | $25.00 |
| Broken Screw Extraction | $45.00 |
General Rifle Service
Complete clean, disassemble, safety check, oil and reassemble. Rust removal and excessively dirty firearms incur an additional charge.
| Service | Price |
|---|---|
| Bolt actions, pumps, lever, autos | $65.00 |
| Double rifles | $120.00 |
| Check headspace | $45.00 |
| Make chamber cast | $60.00 |
| Lap barrel | $100.00 |
| Cut and crown average barrel (sight work additional) | $125.00 |
| Thread barrel for muzzle brake | $150.00 |
| Pin and weld (P&W) | $60.00 |
| Recrown only | $80.00 |
| Drill and tap (per hole) | $15.00 |
| Inlet stock for peep sights or side mounts | $100.00 |
| Glass bed finished rifle (starting at) | $125.00 |
| Install aluminum pillars and glass bed | $175.00 |
| Dovetail for open sights (per cut) | $60.00 |
| Dovetail front and rear (same setup) | $100.00 |
| Trigger work (on request, starting at) | $85.00 |
| Rechamber most rifles (starting at) (bolt, extractor, feeding work additional) | $200.00 |
| Rebarreling (includes fitting, finishing chamber, standard crown — pre-threaded short-chambered barrels only) | $250.00 |
| Chamber and fit barrel blank | $375.00 |
| Cut taper on barrel blank | $175.00 |
| Reline .22 barrel | $175.00 |
| Weld and shape new bolt handle on bolt-action rifle | $125.00 |
| Install swivels (any type, swivels not included) | $50.00 |
General Shotgun Service
Complete clean, disassemble, safety check, oil and reassemble. Rust removal and excessively dirty firearms incur an additional charge.
| Service | Price |
|---|---|
| Most pumps and autos | $65.00 |
| Win. 97, Rem. 11, Browning Auto-5 and similar models | $85.00 |
| Doubles and over/unders | $100.00 |
| High-grade doubles and over/unders with sidelocks | $125.00 |
| Cut crown and reset bead (new bead additional) | $125.00 |
| Cut crown only on single barrels | $75.00 |
| Cut crown only — over/unders and side-by-sides | $175.00 |
| Cut and lengthen forcing cone | $95.00 |
| Ream and thread barrel for screw-in chokes (per barrel) | $150.00 |
| Open fixed choke / barrel | $85.00 |
| Drill and tap for sight bead (one) | $30.00 |
| Drill and tap for sight beads (2 or more, same setup, per hole) | $35.00 |
| Drill and tap for scope mounts (per hole) | $15.00 |
| Install swivels (any type, swivels not included) | $50.00 |
General Revolver Service
| Service | Price |
|---|---|
| Complete clean, disassemble, safety check, oil and reassemble | $65.00 |
| Recrown most revolvers | $85.00 |
| Drill and tap for scope mounts | $80.00 |
| Revolver action job (clean and smooth action, spring kits and parts additional) | $150.00 |
| Rebarrel most revolvers (remove old, install new factory barrel) | $160.00 |
| Set back most revolver barrels | $125.00 |
| Install colored front sight insert | $45.00 |
| Remove or modify hammer spur | $80.00 |
| Chamfer barrel throat | $60.00 |
| Chamfer cylinder chambers | $85.00 |
| Cut new forcing cone | $75.00 |
Semi-Auto Pistol Service
| Service | Price |
|---|---|
| Complete clean, disassemble, safety check, oil and reassemble | $65.00 |
| Recrown for accuracy | $90.00 |
| Drill and tap frame for scope mounts | $125.00 |
| Semi-auto action job (clean and smooth action, parts additional) | $150.00 |
| Lower and flare ejection port (bluing additional) | $95.00 |
| Polish barrel and feed ramp (starting at) | $75.00 |
| Fit custom trigger (does not include trigger) | $65.00 |
| Fit custom hammer (does not include hammer) | $75.00 |
| Mill slide for low-profile rear sight | $125.00 |
| Mill slide for front dovetail sight | $60.00 |
| Install stake-on front sight (sight not included) | $50.00 |
| Install sights of any kind when milling is not required | $45.00 |
| Install extended magazine release | $40.00 |
| Dehorn & break edges for carry | $75.00 |
Custom Slide / Frame Fitting, Barrel Work & Glock Mods
| 1911 Custom | Price |
|---|---|
| Tighten and lap slide and frame to "one to one" fit | $175.00 |
| Fit barrel (ramped) | $160.00 |
| Fit barrel (non-ramped) | $120.00 |
| Fit and install barrel bushing | $85.00 |
| Checker front strap of frame | $225.00 |
| Bevel magazine well (bluing additional) | $100.00 |
| Modify frame for beavertail grip safety | $125.00 |
| Install extended ejector for reliability | $50.00 |
| Fit and install custom extended / ambi safety lever | $65.00 |
| Fit and install custom trigger | $60.00 |
| Fit and install custom hammer | $85.00 |
| Fit and install stake-in front sight | $50.00 |
| Custom Glock | Price |
|---|---|
| Chamfer frame at mag catch (better clearance) | $50.00 |
| Remove finger grooves (left smooth) | $85.00 |
| Competition trigger job (reduces take-up, over-travel, reset; weight set to heavy / standard / comp light) | $150.00 |
Cerakote Refinishing — Pistols, Rifles, Shotguns & More
| Pistol & Revolver | Price |
|---|---|
| Pistol slide only (one color) | $75.00 |
| Pistol slide and frame (one color) | $150.00 |
| Each additional color | $35.00 |
| Revolver (barrel, frame, cylinder, ejector rod, cylinder release, crane/yoke) | $185.00 |
| Rifle (AR Pattern) | Price |
|---|---|
| One color (upper, lower, fore-end) | $200.00 |
| Each additional color | $45.00 |
| Stock tube | $35.00 |
| Barrel | $35.00 |
| Small parts (mag release, bolt release, castle nut, safety, end plate, ejection port cover) | $35.00 |
| Bolt Gun | Price |
|---|---|
| Bolt gun (one color, action + barrel — includes double-barrel shotgun) | $175.00 |
| Each additional color | $45.00 |
| Bolt shroud and bolt knob | $40.00 |
| Shotgun & Lever Gun | Price |
|---|---|
| Shotgun (one color each — barrel + action) | $175.00 |
| Exposed mag tube | $20.00 ea |
| Each additional color | $45.00 |
| Lever gun (action, barrel, mag tube, trigger plate, lever, barrel bands) | $225.00 |
| Magazines | Price |
|---|---|
| Same color as the firearm | $25.00 ea |
| Different color from the firearm | $35.00 ea |
CNC Milling Work & Manual Machine Work
| Service | Rate |
|---|---|
| Optic cuts on handgun slides (starting at) | $150.00 |
| Custom lightening cuts on slides (starting at) | $175.00 |
| Any other CNC work — full hour | $120.00 / hr |
| Any other CNC work — half hour | $60.00 |
| Manual mill and lathe — half hour | $50.00 |
| Manual mill and lathe — full hour | $100.00 / hr |
Need machining beyond firearms? Foxhound runs custom metal fabrication, prototyping, and aerospace & defense work out of the same shop.
AR / AK / HK Parts Kit Builds
| Service | Price |
|---|---|
| Assemble AK parts kit (starting at) | $350.00 |
| Assemble HK / clone parts kit (starting at) | $300.00 |
| Assemble AR parts kit (starting at) | $100.00 |
| Assemble any parts kit not listed (starting at, must include receiver and barrel) | $200.00 |
Common Gunsmithing Questions
Yes, we accept walk-ins Monday through Friday from 10am to 6pm at our Maitland, FL location. For larger jobs (full builds, multi-color Cerakote, CNC work) call ahead to confirm turnaround.
Standard rifle, pistol, and shotgun FFL transfers are $25.00. NFA transfers (machine gun, SBR, SBS) are $150.00. Suppressor transfers are $85.00. NFA engraving is $75.00.
Yes. Threading a barrel for a muzzle brake or suppressor starts at $150.00. Pin and weld is $60.00. We also recrown ($80.00) and cut and crown the average barrel for $125.00. See our dedicated barrel threading and sight work page for more.
Yes — single-color pistol slide is $75.00, slide and frame is $150.00. AR pattern rifle (one color) is $200.00. Each additional color is $35-$45 depending on the platform. Bolt guns, shotguns, and lever guns all have published prices listed above.
Yes. CNC milling at $120/hr, manual mill/lathe at $100/hr. We support custom metal fabrication, prototyping, aerospace, and defense customers. See our manufacturing capabilities.
Our shop is in Maitland, FL — minutes from Winter Park, Orlando, Lake Nona, and Altamonte Springs. We serve all of Central Florida directly, plus nationwide via FFL transfer for sales-related work.